Dosu Malomo, Obinna E. Edeh, Patrick Okolo and Felix C Ibeh
Federal University Oye-Ekiti, Nigeria
University of Benin, Nigeria
Rubber Research Institute, Nigeria
Posters & Accepted Abstracts: Polym Sci
The preparation of various samples of ebonite vulcanizates and their physico-mechanical properties have been investigated using standard methods. This work explores the production of ebonite dust, production of ebonite vulcanizates and investigation of the characterization of the ebonite. Five different ebonite materials ΓΆΒ?Β? labeled A, B, C, D, and E with sulphur content in parts per hundred grams of rubber (Phr) of 32, 34, 36, 38 and 40 respectively were produced. The physico-mechanical properties carried out were tensile strength, hardness and abrasion resistance. The tensile strength (MPa) for sample A, B, C , D and E were 5.6, 3.5, 4.7, 1.7 and 2.0 respectively while the abrasion(%mass loss) were 8.49,4.24,2.59,1.08 and 1.05 respectively and the hardness(IRHD) being 63, 64, 65,70 and 82.The results show that the preparation of ebonite from natural rubber as a base polymer is feasible considering the results of characterization obtained.
Spanish 
Chinese 
Russian 
German 
French 
Japanese 
Portuguese 
Hindi